Owner's manual
h2000 User Manual
36 HB-0845-06
2.3.3 NAV Key Configuration
Our second example is configuring the NAV key. The NAV
key allows the user to select either Rhumb Line or Great
Circle navigation information to be displayed. To select the
required mode, proceed as follows:
1. Press the Page Key once.
2. Press Scroll Up until the upper display shows
CNFG DSP flashing.
3. Press Enter, the upper text now shows PAGE
flashing.
4. Press Scroll Up to select either NAV MODE GC
(Great Circle) or NAV MODE RH (Rhumb).
5. Press Enter to select your desired choice. The
display will stop flashing.
2.3.4 Damping Adjustment - Boat Speed
Our third example is the entry of a Damping Value. We
want to damp Boat Speed which is in the upper display we
therefore use the Scroll Down Key.
1. On the upper display select BOAT SPD.
2. When BOAT SPD is shown in the upper display,
press and hold Scroll Down to select DAMPING
which flashes in the lower text.
3. Press Enter and the current damping value is
displayed on the lower display.
4. Press Scroll Down to toggle between DAMPING
and DYN DAMP.
5. Press Enter and DAMPING (or DYN DAMP)
value flashes.
6. Press Scroll Up or Scroll Down to
increase/decrease the damping value as required.
7. Press Enter to accept new value.