Owner's manual

HB-0845-06 179
L,ddmm.hhh,n,dddmm.hhh,e(CR)
latitude longitude
dd = degrees
mm = minutes
hhh = hundredths of minutes
n = n for north or s for south
e = e for east or w for west
#
##
#OL,s(CR)
s = 0 for automatic output of lat. and long. disabled.
s = 1 for automatic output of lat. and long. enabled.
Automatic output must be started using the #
##
#OS,1(CR)
command.
5.15.12 Assign Remote Channels
#
##
#RC,nn,cc(CR)
nn = 00 to 31 Remote channel number
cc = Item number, see Table 8
5.15.13 Trip Control
#
##
#TC,t,l,d(CR)
t = 0,-5,-10,-15 to start Timer Countdown
= 1 to leave Timer running or unfreeze
= 2 to freeze Timer
l = 0 to reset Trip Log to zero
= 1 to start Trip Log or leave running
= 2 to freeze Trip Log
d = 0 to reset Dead Reckoning to zero
= 1 to start Dead Reckoning or leave running
= 2 to freeze Dead Reckoning
#
##
#TC(CR)
Stops automatic output and returns the current states as
follows:
S,t,l,d,(CR)