Owner's manual

h2000 User Manual
172 HB-0845-06
Would just input the text "NO DATA" to display on remote
0.
Characters received after the terminating (CR) of a
command line and before the # of the next command will be
ignored. This allows comment lines to be inserted between
commands if required.
5.15.4 Channel Numbers
To maintain compatibility with previous Hercules Systems
it has been necessary to allocate the functions that were
available in 290/390 channel numbers (see Tables 7 and 8)
and in the case of NMEA or remote functions have a means
of changing the allocations. This is done by setting CAL
VAL3 for the function to the required channel number or
using the #
##
#RC,nn,cc(CR) command.
Table 7. Channel Numbers for 290/390 Functions
Channel Function
Output
Rate Hz
Format
00 heel angle 1 H0.00 or 0.00H
01 Boatspeed 4 ,0.00 or 20.00
02 stored log 0.25 00.00
03 heading, true 2 359
04 reset log 0.25 00.00
05 heading, magnetic 2 359
06 dead reckoning 0.25 00.00 or 359
07 battery volts 0.5 12.00
08 depth feet 0.5 99.9' or 999'
09 optimum wind angle 0.5 -00 or 00
10 apparent windspeed 1 A 0.0 or A99.9
11 depth metres 0.5 30.2d or 304d
12 True windspeed 1 T 0.0 or T00.0
13 apparent wind angle 2 -179 or 00-
14 True wind angle 1 =179 or 179=
15 true wind direction 1 359.
16 reaching performance 0.5 P000