Specifications

getting started
h1000 pilot
Page 6
getting started
Before switching the Pilot on for the first
time, check that the installation has been
wired according to the instructions
contained in the
h1000 Pilot Installation
Manual.
After initial power-up the Pilot displays
Comp Mode and shows the Pilot status as
OFF.
Pressing the MODE key with the Pilot OFF
scrolls through the available Pilot modes
Comp, Wind and Nav providing the data is
available on the system.
Pressing the UP/DOWN keys with the Pilot
OFF the display scrolls through the six user
pages returning to OFF Comp Mode.
engaging pilot
Pressing the ON key activates the Pilot in the selected mode.
Pressing the UP/DOWN keys with the Pilot ON, the display scrolls through the fixed Pilot pages for
the selected mode.
Note
NoteNote
Note: Compass Mode shown above. Wind and Navigation modes are similar (see Pages 7 to 10).
disengaging pilot
Disengages the Pilot.
compass mode