Specifications

h1000 Pilot
controls
Page 5
controls
Light control
The lighting level can be changed at any time by pressing the LIGHTS key.
This causes the lighting level to cycle in the sequence high – medium –
low – off and then back to high.
The UP/DOWN keys are used to move through data pages, scroll through
items in a list, and alter numerical values.
Press the ENTER key to select the Main Menu from a data page, select
items from a list entry, and store values to memory.
ON engages the Pilot in the selected mode.
OFF disengages the Pilot from all modes.
The rotary knob is used to alter the Pilot course in 1° increments, scroll
through items in a list, and alter numerical values.
Alters the Pilot course by 10° to port. Multiple key presses are used for
large course changes.
Alters the Pilot course by 10° to starboard. Multiple key presses are used
for large course changes.
Successively cycles through Compass, Wind and Nav modes if available.