Specifications

mob procedure
h1000 pilot
Page 24
mob procedure
mob automatic recovery: power only, pilot on
1. Press the MOB key as soon as the person is lost overboard.
2. All digital displays will flash the MOB Alarm Message and the alarm will sound (if connected).
3. Pressing any key on the
h1000 Pilot display silences the MOB alarm. This action clears the
alarm screen and the display now shows the bearing and distance to where the incident
occurred. The bearing and distance to the casualty are shown under the title “Steer” on the
right hand side of the LCD.
4. If necessary, reduce the boat speed to less than 8 knots.
5. Press the MOB key three times in quick succession to initiate the MOB automatic recovery.
6. The autopilot will now control the steering and perform the Williamson Turn back onto the
reciprocal heading.
7. Press the OFF key to disengage the Pilot as you approach the incident and recover the
person(s).
8. Press and hold the MOB key for five seconds to cancel the MOB function and clear the display
of MOB data.
9. The Pilot will now default to OFF Compass Mode.
Notes:
1. Activating the MOB Alarm via the Pilot MOB key will also activate the MOB feature on the CND
if connected via the Fastnet
2
.
2. Activating the MOB Alarm via the CND MOB key will also activate the MOB feature on the Pilot
if connected via the Fastnet
2
.
3. The Automatic Recovery procedure cannot be initiated from the CND.