Specifications

h1000 pilot
mob procedure
Page 23
mob procedure
mob manual recovery: for all boats, pilot off
1. Press the MOB key as soon as the person is lost overboard.
2. All digital displays will flash the MOB Alarm Message and the alarm will sound (if connected).
3. Pressing any key on the
h1000 Pilot display silences the MOB alarm. This action clears the
alarm screen and the display now shows the bearing and distance to where the incident
occurred. The bearing and distance to the casualty are shown under the title “Steer” on the
right hand side of the LCD.
4. The boat should now be manually steered back to where the incident occurred by following the
bearing and distance shown on the Pilot display.
5. Recover the person(s).
6. The MOB feature can be disabled, by pressing and holding down the MOB key for five seconds
until the display clears. The Pilot will now default to OFF Compass Mode.
mob manual recovery: for all boats, pilot on
1. Press the MOB key as soon as the person is lost overboard.
2. All digital displays will flash the MOB Alarm Message and the alarm will sound (if connected).
3. Pressing any key on the
h1000 Pilot display silences the MOB alarm. This action clears the
alarm screen and the display now shows the bearing and distance to where the incident
occurred. The bearing and distance to the casualty are shown under the title “Steer” on the
right hand side of the LCD.
4. The boat should now be manually steered under autopilot control back to where the incident
occurred. This is done with the use of the -10°, +10° keys (display or hand-held) and the rotary
knob and following the on-screen bearing and distance to where the incident occurred.
5. Recover the person(s).
6. The MOB feature can be disabled, by pressing and holding down the MOB key for five seconds
until the display clears. The Pilot will now default to OFF Compass Mode
.