Specifications

h1000 pilot
main menu
Page 13
memories menu
Compass
The compass memory allows a pre-set heading to be defined and any deviation from that course
will be shown as an error on the Tactical Compass page. This course can be updated by one of
three methods. The first method, is simply by pressing the ENTER key whilst the display is showing
the Tactical Compass page. The second is by using the drop down box in the Memories →
Compass → Course, drop down menu. The drop down box offers Use heading which sets the
course to the heading the boat is presently steering to and User defined which allows a pre-set
value to be entered.
PORT and STBD courses (sailboats only) are retained and updated at each press of the ENTER key
whilst in the Tactical Compass page. When OK is selected, control returns to the Memories Menu.
reset trip log (this function is only available if a speed input is present)
Reset trip log clears the trip log value back to zero. The stored log however is unaffected by this
operation. Pressing the UP/DOWN key toggles between OK and Cancel.
alarms
Alarm levels for various measured functions can be set, or inhibited. All the alarms default to OFF
on a factory reset.
If available on the system, the Wind speed, Shallow depth, and Off course alarms can be set from
the Alarms menu. Selecting Pilot activates the Pilot Alarms screen where the Watch timer and
Pilot off course alarms can be set.
It should be noted that two Off course alarms are available with the
h1000 Pilot system. The first,
which is located directly on the Alarms menu, is triggered from the Tactical Compass page. The
second Off course alarm, located within the Pilot Alarms menu triggers only when the Pilot
deviates from the Pilot Set Course.