Owner`s manual

appendix c
cnd
Page 48
terms and functions
This section explains the terms that may be unfamiliar to the reader.
Some terms are followed by a brief description on how to select the related menu option, listing
the key sequence.
About
(page)
Selects a page that gives information on
software and cartography version and general
software specification.
Anchor Ala rm
Specifies the radius of an anchor circle around
the boat, when exiting from the circle, the CND
emits an alarm and a pop-up window is
opened.
The default setti ng is Off.
Arrival Alarm
Specifies the radius of a circle around the
Waypoint/Mark of a route: when your boat
reaches this circle the alarm sounds.
The default setti ng is Off.
Arrival Ti me
The estimated time of day you will reach your
destination, based on your current speed and
track from GPS.
Attention Areas
Enables by filling area (On), enables only
contour (Contour) or disables (Off) the display
of Attention Areas. A special symbol (!) is
placed inside the area selecting On or Contour
options. This is valid also for the categories:
FISHING FACILITY, MARINE
FARM/CULTURE, MIL ITA RY PRACTICE
AREA, RESTRICTED AREA, and SEAPLANE
LANDING AREA. When the area is small, it is
identified only b y the boundary. The defa ult
setting is Contour.
Azimuth
The angular measurement from the horizon to
a satellite or another object.
Bathymetric Lines
Imaginary lines connecting points of equal
water depth.
The default setting is On.