Owner`s manual

cnd
settings
Page 41
track functions
Selecting Time Interval
It is possible to change the frequency that the
CND records the boat’s position in memory. It
is important to match the frequency of
recording to the distance that your boat will be
travelling in order that the whole passage can
be tracked. To change the frequenc y, select
the “Interval” option using the up/down
CURSOR
key and change the time between
recording by pressing the
ENTER
key. The
maximum interval available is 1 minute which
gives a total maximum Tracking period of over
11 hours. The default setti ng is 10 sec.
Selecting Vector
Vector feature displays a vector line protruding
from the boat showing where the boat will be in
a set period of time. This line is based on the
boat’s current speed and course and is useful
for indicating at any given time where the boat
is heading. Various lengths of vector are
available, also Off to disable the Vector line
display. Use the up/down
CURSOR
key and
change the time between recording, press the
ENTER
key to confirm .
The default setting is Off.
Delete Current Track
Deletes all the track memory. A warning
message appears, press the
ENTER
key to
confirm deletion.