Owner`s manual

advanced features
cnd
Page 28
routes
Uploading waypoints from a PC
When uploading a series of pre-set waypoints from a PC via the NMEA interface (WPL), first press
the ‘Setup’ button and select ‘Waypoints’ from the menu. Then upload your data from the PC, the
information on your chosen waypoints will appear on the screen. Once the data has been
transferred, press the ‘Clear’ button twice to view the waypoints on the chart.
Main Setup Screen
At anytime, you may add or delete waypoints,
see a route summary, reverse the direction of
the route or erase the entire route.
The CND can store up to 10 individual routes,
only one can be selected as the current route.
Only the currently selected route can be
navigated to or edited.
Press the
SETUP
key
Selecting a route
Using the
CURSOR
keypad select Routes from
the Setup screen.
From the Main Route screen,
t
he
CND
displays
a list of available routes.
Routes are permanently stored in the memory
as they are created.
Selecting a route to work
Scroll through the routes using the up/down
CURSOR
keypad, pressing the SELECT
Softkey selects the ro ute.
When an existing route is selected pressing the
VIEW Softkey will auto matically zoom and pan
the chart display to show the route on screen.
The route, shown by straight segments, is
centred on the screen.
The EXIT Softkey returns to the previous
screen.