Owner`s manual

getting started
cnd
Page 12
navigating on a route
Moving Waypoint
Place the cursor on the Waypoint and press the
MOVE Softkey, using the
CURSOR
keypad
move the Waypoint, a dotted line connecting
the Waypoint to the new position, is shown.
To place the Waypoint in the new position,
press the ACCEPT Softkey.
Inserting a Waypoint
Place the cursor on the route leg a nd press the
INSERT Softkey.
The line between the two Waypoints is turned
into a dotted line (rubber-band), now move the
cursor to the new position.
Once yo u ha ve posi tioned the cursor at ne w
location, press the PLACE Softkey.