Owner`s manual

getting started
cnd
Page 10
overview of the display
navigate to a single destination
Using the
CURSOR
keypad move the cursor to
your desired destination then press the NAV
TO softkey, this softkey will the n change to the
START softkey, pressing the START softkey
will then create the Direct Target.
A line is drawn connecting the Direct Target
symbol with the boat’s position, all navigation
data is no w referred to this Target.
Distance to bearing
Position the cursor on the Direct Target symbol
and the Cursor information box will contain the
Latitude/Longitude, the distance and the
bearing from your boat’s position.
Steer
Pressing the STEER Softkey will display the
Destination text box in place of the Position text
box.
Hide Data
Pressing the HIDE DATA Softkey will remove
the i nformation box and display a full screen
chart and the softkeys.
Deleting a Destination
Using the
CURSOR
keypad to place the cursor
on the Direct Target symbol, the softkey will
then change to the STOP softkey, press the
STOP softkey and the Direct Target symbol
disappears from the screen.
Cursor Bo
x
Cursor
Text Box
Softkeys
Label