Manual

Chapter 4: Start display
4.4
by lat, long specify the position by entering latitude and
longitude
check port displays a dialog to show the history of
adjustments to this end of the line – see
below.
The
check port
option brings up the following dialog shown in Figure
4.2 giving you a history of adjustments to the end of the line, and allows
you to undo changes.
The
move m
column shows the distance in metres of each adjustment;
the most recent is on the top row.
brg
shows the bearing of each
adjustment from the previous buoy position;
length m
is the length of
the start line; and
line WD
is the line wind direction i.e. the wind
direction for the line to be neutral.
Use
Undo
and
Redo
to move the buoy back to a previous position.
Figure 4.2