Manual

Installing charts
2.3
Livecharts
With Deckman version 4 or later, the complete catalogue of Livecharts
is supplied on the program CD. Charts can then be enabled by obtaining
an unlock code from your local agent or B&G.
For help in choosing the charts you require, view the chart catalogue:
open Deckman, select
menu>charts>chart interaction
to stop the
regular Deckman display updating and instead interact directly with the
charting package.
Hold down the right mouse button until a popup menu
appears. Select
Properties>Chart Settings (Global)
. Check the
View
box in the
Chart catalog viewing
and then click OK. Select
Livecharts
followed by OK and you will be presented with a toolbar that enables
you to view details about different charts.
When you know the charts you wish to use, contact your local agent or
B&G to obtain the unlock codes. Once you have the necessary codes,
run the
Unlock.exe
program on your distribution CD from Windows
Explorer. The path for this is:
D:\Livechart Archive\unlock (where 'D' is your CD drive)
The paths for the location of the charts on your CD and the desired
destination should be displayed correctly automatically, but if not set
these as follows:
Install charts
from
D:\Livechart Archive\charts\live_b (where 'D'
is your CD drive)
Install charts
to
C:\Charts\Live_b (where 'C' is the drive where
Deckman is installed)
For each chart you wish to install enter the unlock code (which will be
supplied in four groups of characters) into the four boxes marked
Code
1, Code 2
… etc and the name (e.g. BA2045) into the fifth box (if
installing a folio of charts leave the final box empty). This procedure
must be repeated for all the charts you wish to install.