User Manual

9
ALL THE PUMP YOU NEED AND MORE
Revised 7-5-12
Drive Display/Operation
No. Display Name Function
1
Data Display Area Displays the frequency reference, parameter number, etc.
2 ESC Key Returns to the previous menu.
3 RESET Key
Moves the cursor to the right.
Resets the drive to clear a fault situation.
4 RUN Key Starts the drive.
5 Up Arrow Key Scrolls up to select parameter numbers, setting values, etc.
6 Down Arrow Key Scrolls down to select parameter numbers, setting values, etc.
7 STOP Key
Stops the drive.
Note: Stop priority circuit. A fast stop is available by pressing the STOP key when
the drive detects a danger, even if the drive is running by a signal from the multi-
function contact input terminal (REMOTE is set). To avoid stoppage by using the
STOP key, set o2-02 (STOP Key Function Selection) to 0 (Disabled).
8 ENTER Key
Selects all modes, parameters, settings, etc.
Selects a menu item to move from one display screen to the next.
9 RUN Light Lit while the drive is operating the motor.