User guide

Dry Weight Capacity
Model Capacity
SP-40 40 lbs 18 kg
SP-45 45 lbs 21 kg
SP-50 50 lbs 23 kg
SP-60 60 lbs 27 kg
SP-65 65 lbs 30 kg
SP-100 100 lbs 45 kg
SP-110 110 lsb 50 kg
SP-130 130 lbs 59 kg
SP-135 135 lbs 61 kg
SP-155 155 lbs 71 kg
SP-165 165 lbs 75 kg
SP-185 185 lbs 84 kg
SP-195 195 lbs 89 kg
Table 5.1: Proper Load Sizing
5.3 Wash Program Execution
After power is applied to the machine, and the internal diagnostics are complete, the machine is
ready for a program to be chosen. The EL6 display will show:
PROGRAM N.
The FM7 display will show:
ENTER PROG
Using the keypad, type the number of the program you wish to run followed by the ENTER key.
Standard programs are outlined in the EL6 stock program list, included with the machine. The
display will change to show the fist cycle of the selected program:
PRWH1 EXECUT.?
press START to execute the program, or RESET to return to program selection. While the program
is executing, the display shows the current segment of the program, and the ending condition of
the segment. See the following examples:
5.3.1 End Step Condition: Level
If the end requirement of the segment (step) is a particular water level, the display will show:
RINSE1 LVL=cm12
cm12 is the actual water level in the machine (12 centimeters). Pressing the LEVEL key shows, for
43