User Manual

Table 4.1: M720 Passwords
Level Password Description
1 1234 Reset counters per program
Edit program parameters
Edit program name
Test outputs manually
2 9999 Reset counters in total
Edit machine parameters
Change language
Restore factory settings
3 1658 Edit machine configuration
4.3 Delayed Start
With the M720 controller it is possible to define a delayed start. If this menu item is chosen, the
screen for entering the start delay will be displayed.
In this screen the number of hours and minutes delay can be entered. Changing values can be
done with the NUMERIC keys and with the PLUS and MINUS buttons. Changing the cursor to
another edit field can be done with the ARROW UP and/or ARROW DOWN buttons. Confirming a
value must be done with the ENTER key.
If the ENTER key is pressed when the cursor is on the minute field, the delayed start will be ac-
tivated and the overview screen will be activated again. If both the number of hours and the
number of minutes are set to 0, the delayed start timer will be preset to 30 seconds, which is the
minimum time for a delayed start. The maximum time adjustable for a delayed start is 11 hours
and 59 minutes.
In the overview screen, the message DELAYED START IN: will be displayed, followed by the time
until the machine will start in HH:MM:SS format.
The dryer will count down until the delayed start time displayed is 0, and then it will start the
selected program. For safety reasons, the beeper will sound 5 seconds before the machine starts.
If delayed start is activated, and a program cycle is started manually, the delayed start will be
canceled. Canceling the delayed start can also be done with the STOP key.
4.4 Counter Menu
If the item COUNTER MENU is chosen from the main menu, the screen with the counter menu will
be displayed. In this menu, an item can be selected with the ARROW UP and/or ARROW DOWN
key. Confirming the choice of an item must done with the ENTER key
The M720 dryer controller has 4 sets of counters. The first set is Counters Per Program. Every
18