User Manual

When a drying or cool-down cycle is active, the adjusted drying or cool-down time is set at

the moment the drying or cool-down cycle starts. Sometimes it is necessary to manually ad-

just the time to a higher or lower value. This can be done with these buttons in combination

with the SHIFT key (see item 10). If the SHIFT key (see item 10) is pressed in combination

with the INCREASE CYCLE TIME key ( ), the current time remaining in the drying or

cool-down cycle will be increased by 5 minutes. If the SHIFT key (see item 10) is pressed in

combination with the DECREASE CYCLE TIME ( ) key, the current time remaining in the

drying or cool-down cycle will be decreased by 5 minutes. Please note that these changes in

time are temporary. They do not change the programmed value in the active program. Also,

if a temporary change is made in the drying cycle of the program, this does not inﬂuence the

cool-down time setting programmed.