Manual

Figure 4.3: IS Series - Speed Control Panel
EMERGENCY STOP – Press to stop machine in case of an emergency. Pressing while machine is in
operation and temperature is above 70
o
C (158
o
F) can cause damage to the machine.
GAS ON – illuminates when the Gas switch is in the on position.
4.1.2 Speed Control Panel
Refer to Figure 4.3 on page 23:
SPEED – indicates actual speed in feet/minute of the ironer, can also be set to display in me-
ters/minute. Contact the factory for details.
SPEED KNOB – Rotate clockwise for increased speed, counter-clockwise for slower speeds.
JOG – press and hold to jog machine forwards or backwards to remove caught goods.
DELIVERY – set switch to Front to return the finished goods to the front of the machine; set to Rear
for rear return.
EMERGENCY STOP – Press to stop machine in case of an emergency. Pressing while machine is in
operation and temperature is above 70
o
C (158
o
F) can cause damage to the machine.
POWER – Indicates that the machine is ready to run
START – Press and hold for 1-2 seconds to start machine. Make sure the Emergency Stop buttons
are released.
23