User Manual

OPERATING AND PROGRAMMIN G INSTRUCTIONS
8-20
MAIN MENU-> DELAYED START
-> COUNTER MENU -> COUNTERS PER PROGRAM
-> COUNTERS PER DAY
-> COUNTERS IN TOTAL
-> NON-RESETTABLE COUNTERS
-> EDIT PARAMETER MENU -> EDIT PROGRAM PARAMETERS
-> EDIT PROGRAM NAME
-> EDIT MACHINE PARAMETERS
-> TEST PROGRAM MENU -> VIEW STATUS OF INPUTS
-> VIEW STATUS OF OUTPUTS
-> TEST OUTPUTS MANUALLY
-> CHECK POWER SUPPLY VOLTAGE
-> SYSTEM SET-UP MENU -> ADJUST DATE & TIME
-> CHANGE LANGUAGE
-> RESTORE FACTORY SETTINGS
-> RESET MAINTENANCE REQUEST
-> ENTER UNLOCKING CODE
-> ALARM HISTORY
-> EDIT MACHINE CONFIGURATION
-> CONTROLLER INFORMATION
6.1 Entering a password
For gaining access to some of the menu items mentioned above, a password is necessary.
The controller will not ask for a password unless it is needed to approve access to a menu item. If
an item is password protected the password screen will be activated and the controller will prompt
to enter a password.
Passwords are available in different levels:
- Level 1 1234 Reset counters per program
Edit program parameters
Edit program name
Test outputs manually
Adjust date & time
- Level 2 9999 Reset counters in total
Edit machine parameters
Change language
Restore factory settings
- Level 3 1658 Edit machine configuration
If a password is entered, it will remain valid for 10 minutes. If no action which requires a
password is undertaken for 10 minutes, the password level will be reset to 0.
A special password (1111) is available for resetting the maintenance request (see chapter
6.6.4)