User Manual

OPERATING AND PROGRAMMIN G INSTRUCTIONS

8-13

will be increased by 5 minutes. If the SHIFT button (see item 10) is pushed in combination with the

DECREASE CYCLE TIME button, the current time remaining in the drying or cool-down cycle

will be decreased by 5 minutes.

Please note that these changes in time are temporary. They do not change the adjusted

value in the active program. This means that in the next program cycle, the settings adjusted in the

program cycle will be used again. Also, if a temporary change is made in the drying cycle of the

program, this doesn’t influence the cool-down time setting adjusted.

3.1 Buttons

Item number

in picture

Normal function Shift function

5 Start -

6 Stop -

10 Shift -

9 Enter Clear

4 Select program Single cycle

3 Home Setup

7 Arrow up (move to previous item) Move to first item in parameter list

7 Arrow down (move to next item) Move to last item in parameter list

8 Plus (increase single step) Plus (increase multiple steps)

8 Minus (decrease single step) Minus (decrease multiple steps)

Number one / alphanumeric special

chars

Increase temperature set-point

12 Number four / alphanumeric Decrease temperature set-point

13 Number two / alphanumeric Increase cycle time

13 Number five / alphanumeric Decrease cycle time