User Manual

Specifications
Parameter Value Unit
Rated input voltage charger 5 Vdc
Input voltage tolerance ±5 %
Rated input current 500 mA
Battery charge capacity sensor 60 mAh
Battery time >10 h
Dimensions charger(lxwxh) 111x71x22 mm
Weight charger 80 g
Operating temperature 0-45 °C
Operating height 0-2000 m
Maintanance
Before any work on the unit, pull the charging cable out of
the unit and make sure the unit is turned off.
Battery replacement
If the battery is not functioning properly, do not replace
the battery by yourself. Let a qualified technician perform
this replacement to prevent damage or injury to yourself
or the equipment. There is danger of explosion or fire when
the batteries are incorrectly replaced! Replace only with the
same or equivalent type of batteries.
Cleaning
Do not poke anything in the USB connector (except for a
micro-USB cable) and do not clean with pressurized air.
This could damage the connector. If the exterior needs
to be cleaned, use a piece of dry or damp cloth. Cleaning
alcohol can be used as well. If the USB connector needs to
be cleaned, then this should be performed by a qualified
technician.