User Manual

Charging Case
PitchPerfect includes a charger case that can be used to
store, cary and charge the sensors. The charger is delivered
with a USB-C cable.
1. Power up the charger by connecting it with a USB-C cable
to an AC-adapter. Any AC-adapter, with a 5VDC USB-A
output rated at 500mA can be used for this charger. The
green light on the front of the charger will turn on when
connected properly.
2. The sensors will start chargin when when the magnets on
the sensor are connected in the charger case. Make sure the
logo’s orientation on the casing and the sensor are alligned.
Putting the sensors in the any other orientation will result
in the sensors not being charged. The light indicator blinks
slowly when it is charging.
3. When the sensor is fully charged the light indicator stops
blinking and remains on.
4. If both sensors have been fully charged the USB cable can
be unplugged from the charger.