User manual

OPERATION MANUAL
Technical changes reserved
0141 0316-25 19.08.2015
USB-I²C-adapter
for B+B Temperature-module with I²C-output
DescriptionDescription
Description
Description
In order to support the user for integration of own ASIC module with
I²C-Interface, we have developed this easy to handle PC interface. The
probe can be operated with a PC to test the functionality and capture
the measured values of sensors.
In principle it is an USB on a I²C-converter, which is addressed by a
simple ASCII sequence. The USB-driver software emulates a serial
COMinterface.
The ASCII protocol of data communication is well documented. Hence,
integration into own programs through standard communication rou-
tines of all the modern programming languages is possible.
The interface adapter is also suitable for accessing the ASIC, for exam-
ple, to program another I²Caddress.
Further information on ASIC and programming can be obtained on re-
quest.
Characteristic features
• Universal USB on I²C Adapter
• For all B+B Temperature modules with I²C-output
• Simple serial ASCII-protocol
• Operation possible over terminal
Areas of application
• Probe testing, product development
• Interface for own PC-based products
• Conguring I²C-Bus address
• Calibration of ASICs
Technical data
PC-USB Schnittstellenadapter für I²C
Interface USB-interface, 1.1 and 2.0 compatible
Dimensions (B x H x T)
79 x 21 x 39 mm
Sensor connection
Over RJ11 plug, 6-pin
Serial communication
19200 Baud, 8N1, ASCII protocol
Operating voltage
8 V/10 mA for ASIC-module
Voltage source Over USB-interface
Operating current
max. 80 mA
CC-conformance
EMV-noise emission:
EMV-noise withstanding
2004/108/EG
EN 61000-6-3:2011
EN 61000-6-2:2007
Scope of supply USB-I²C-adapter, consisting of adapter-
cable, USB-adapter, USB-connection cable
and software on CD
Articleno.
USB-I2C-KAB
USB-I2C-KAB, consisting of adapter-cable, USB-adapter,
USB-connection cable and software on CD
Attention
Please avoid extreme mechanical and inappropriate exposure.
The device/product is not suitable for potential explosive areas and
medical-technical applications.
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon [phone] | Fax [phone] | [e-mail] | bb-sensors.com
1 / 4