Datasheet

Released 03/2008 Rights reserved f or change in techTechnische Änderungen v orbehalten! HYGROSENS INSTRUMENTS GmbH Postf ach 1054 D-79839 Löf f ingen Tel: [phone] Fax: [phone]
Page 3
4 CHANNEL TEMPERATURE MEASURING SYSTEM
WITH USB-INTERFACE CON-TSIC-LABKIT-USB
Accessories (Optional)
Software PCLOG
Besides storing data on hard disk, the software
offers a very important feature of graphical repre-
sentation of all measured and recorded channels
in the form of temperature Vs time chart (on-line
scriber function). By means of Drag & Click, the
window section can be enlarged and the time or
temperature axis can be scaled as desired.
Besides the graphic view, representation is also
possible in the form of a table. The in-between
space is used for capturing measured data series
into a spreadsheet program (for example
EXCEL
TM
) or for word processing. All tables and
graphic representations can be printed out in
colour. In addition, simple monitoring and regula-
tion functions are also integrated in the software.
Limits can be set for each channel. An acoustic
signal (Wave file) is given out when the values are
exceeded. Control of up to eight external users is
possible by a relay card, which is to be attached at
the parallel port.
Software Profilab
The driver for USB-measuring probe is directly
integrated in Profilab. With this software, profes-
sional measurement projects can be carried out in
a simple, graphical development platform. You can
simply draw the wiring diagram of the measure-
ment circuit and do the project design. Without any
knowledge of programming, the measurement
values of temperature and humidity can be easily
used in the measurement circuit. Arithmetic and
logical components take care of linking and
processing of the measured values. Modules like
impulse generators, timers and relay cards etc.
provide extensive possibilities for control and regu-
lation.
Various instruments, scribers and tables serve as
the storage and representation of measured values
and you can monitor the measurement system with
display and control elements. The system is oper-
ated through a self designed front panel, on which
you can arrange switches, potentiometers,
displays, LED´s, instruments etc. The software
also enables compilation of the project into an
EXE-file, which can run without “Profilab“.
Relay Cards
The output of control information is given by the
WINDOWS software "PCLOG " or "PROFILAB"
over the LPT-Port as switching signal. The relay
cards, available as accessories, are needed for
giving connection for heavier loads like heater
valves, servomotors or signal generators. The
switching status of output is indicated through
LEDs. The relay boards can also be used for many
other applications.
Ordering number catalogue for Sensors
TSic 206 Temperature sensor,
TO92 Housing, -50...+150 °C
TSIC206-TO92
TSic 306 Temperature sensor,
TO92 Housing, -50...+150 °C
TSIC306-TO92
TSic 206 Temperature sensor,
SO8 Housing, -50...+150 °C
TSIC206-SO8
TSic 306 Temperature sensor,
SO8 Housing, -50...+150 °C
TSIC306-SO8
3-core Connection cable,1.5 m TSIC-KAB-1M5
Software
Windows-Software PCLOG 18 30 30
Windows-Software PROFILAB
EXPERT
18 30 44
Relay cards
8 Relays for mains voltage,
with USB-interface
15 65 32
Accessories for USB Products
USB Connection cable, 5m ZUB-USB-KAB-5M
USB Extension cable, 5m ZUB-USB-VERL-5M
USB Repeater ZUB-USB-REP
USB Hub for 4 USB Device ZUB-USB-HUB4
Items prefixed with * mark are not available through
CONRAD-ELECTRONIC. Please directly contact
HYGROSENS