Datasheet

Released 03/2008 Rights reserv ed f or change in technical data! HYGROSENS INSTRUMENTS GmbH Postf ach 1054 D-79839 Löf f ingen Tel: [phone] Fax: [phone]
CFriedrich, Datenblatt_DBD.dot
4 CHANNEL TEMPERATURE MEASURING SYSTEM
WITH USB-INTERFACE
Characteristic features
 PC LabKit with USB-interface
 Up to 4 Temperature measuring points –
50 ... 150 °C
 Simple, three wire connection for the
sensors
 Over 10 meter lead length possible
 0.1 °C resolution with TSic 106/206/306
 0.034 °C resolution with TSic 506
 Up to 0.01 °C resolution with TSic™ 706VHA
 High accuracy and long term stability
 Scope of supply inclusive of Windows-Soft-
ware
Typical areas of application
 Own product development
 Applications in laboratory
 Quality assurance
 Temperature measuring systems for
customised projects, under Windows or
Linux
Windows-Software
 Calculation and display of minimum,
maximum and average values
 Tabular representation of measured values
 Recording of data on hard disk
Description
The temperature Labkit is an innovative solution
for precise measurement of up to four temperature
channels over the USB interface of PC. The
system is meant for direct connection of digital
TSic™ Temperature sensors.
The innovative lab set was developed as a
plug&play tool for fast and efficient development of
temperature sensors applications. It is an efficient
tool to develop PC or micro-controller based appli-
cations in the shortest possible time.
The scope of supply of the operating system
consists of the PC-adapter with connection cable,
a TSic™ connection cable with 3-pin plug as well
as an easy to use Windows-software. The
recording and graphical representation of meas-
ured values is through the PC.
The included Windows-software enables simulta-
neous display of the current measurements of up
to four connected sensors, representation of
minimum, maximum, and average values as well
as data recording of the measurements in a file,
for example, to visualise as temperature - time
diagram with the help of EXCEL.
The additionally available software PCLOG
enables Online-Visualisation of complete tempera-
ture process as well as to implement simple
switching or regulation process over an optional
USB-Relay card.
Note: The TSic™ sensors are not included in the
scope of supply and should be ordered separately.
Technical data
Temperature measurement
Temperature meas-
uring range
As per Sensor Type, e.g.
–50 ... 150 °C with Tsic 206
Temperature resolution As per Sensor 0.1 K to 0.01
K, e.g. 0.1 K with Tsic 306
Accuracy As per Sensor, e.g. ±0.3 K
from 10 ... 90 °C with Tsic
306
Channel numbers 1-4
General
Sensor connection
length
Max. approx. 10 - 50 m
Communication
Sensor
ZACWIRE Protocol, unidirec-
tional
PC-connection USB, 1.1 or 2.0 compatible
Communication inter-
face
Com-Port Emulation with
FTDI Chip
Temperature range Electronics 0 ... 60 °C
Power supply Over USB, approx. 5 mA
Dimensions 80 x 40 x 23 mm
EMV-compatibility
Noise emission:
Noise immunity:
89 / 336 / EWG
EN 61000-6-3:2001
EN 61000-6-2:2001
Scope of supply In carry case including PC–
Software „RECORDER“
Accessories See ordering number over-
view
Rights reserved for change in technical data!
4 01 61 38 4 89 31 6
Best. Nr. 50 21 98
CON-TSIC-LABKIT-USB