Data Sheet

OPERATION MANUAL
Technical changes reserved
0141 0316-31 18.10.2021
PC measuring system
for TSIC
TM
temperature sensors and USB-interface
DescriptionDescription
Description
The temperature Labkit is an innovative solution for precise measurement of
up to four temperature channels over the USB interface of PC. The system is
meant for direct connection of digital TSic™ Temperature sensors.
The innovative lab set was developed as a plug&play tool for fast and efcient
development of temperature sensors applications. It is an efcient tool to de-
velop PC or micro-controller based applications in the shortest possible time.
The scope of supply of the operating system consists of the PC-adapter with
connection cable, a TSic™ connection cable with 3-pin plug. The recording
and graphical representation of measured values is through the PC.
The Windows-software enables simultaneous display of the current measure-
ments of up to four connected sensors, representation of minimum, maximum,
and average values as well as data recording of the measurements in a le, for
example, to visualise as temperature - time diagram with the help of EXCEL.
The additionally available software PCLOG enables Online-Visualisation of
complete temperature process as well as to implement simple switching or
regulation process over an optional USB-Relay card.
Note: The TSic™ sensors are not included in the scope of supply and should
be ordered separately.
Technical data
Characteristic features
• PC LabKit with USB-interface or RS232
• Up to 4 Temperature measuring points –50...150 °C
• Simple, three wire connection for the sensors
• Over 10 meter lead length possible
• 0.1 °C resolution with TSic 206/306
• 0.034 °C resolution with TSic 506
• Up to 0.01 °C resolution with TSic™ 706VHA
• High accuracy and long term stability
Areas of application
• Temperature measurement in the inner area
• Own product development
• Applications in laboratory
• Quality assurance
• Temperature measuring systems for customised projects,
under Windows or Linux
Windows-Software
• Calculation and display of minimum, maximum and average values
• Tabular representation of measured value
s
• Recording of data on hard disk
Temperature measurement
Temperature
measuring range
As per Sensor Type,
e.g. –50...150 °C with Tsic 206
Temperature resolution
As per Sensor 0.1 K to 0.01 K,
e.g. 0.1 K with Tsic 306
Accuracy
As per Sensor, e.g. ±0.3 K from 10...90 °C with
Tsic 306
Channel numbers 1-4
General
Sensor connection
length
Max. approx. 10 - 50 m
Communication sensor ZACWIRE Protocol, unidirectional
PC-connection USB, 1.1 or 2.0 compatible or RS232
Communication
interface
USB: Com-Port Emulation with FTDI Chip
RS232: 9600 Bd, 8N1
Temperature range Electronics 0...60 °C
Power supply
TSIC-LABKIT-USB: Over USB, approx. 5 mA
TSIC-LABKIT-RS232: external „wall-wart“ 12 V
Dimensions 80 x 40 x 23 mm
CE-conformance 2014/30/EU
EMV-noise emission EN 61000-6-3:2011
EMV-noise withstanding EN 61000-6-1:2007
Scope of supply In carry case
Accessories See ordering number overview
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon [phone] | Fax [phone] | [e-mail] | bb-sensors.com
1 / 3