Data Sheet

DATA SHEET
Technical changes reserved
Plugconguration
Temperature measurement 0 ... 10 V, Type –10V
Pin
Function Description
1 +DC / AC 24 V Operating voltage
2 GND 0 V Reference potential
3 TEMP 0 ... 10 V Temperature-Signal 0 ... 10 V
The measurement of the output signal should be done with separate
signal ground, in order to avoid measuring error due to voltage drop
at the supply ground.
Temperature measurement 4 ... 20 mA, Type –20MA
Pin Function Description
1 +DC 24V Operating voltage
2 TEMP 4 ... 20 mA Temperature signal 4...20 mA
The shielding (SHIELD) is to be optionally covered. Connection
through shielded lines is recommended.
Temperature probe with transducer
Series TF-GLT
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon [phone] | Fax [phone] | [e-mail] | bb-sensors.com
4 / 4