Data Sheet

DATA SHEET
Technical changes reserved
Product variants
Type INT:
The protection tube with the temperature sensor is solidly attached to
the evaluation electronics. Other protection tube lengths (max. 500
mm) are available on inquiry.
Type EXT:
The measuring probe is connected to the evaluation electronics
through a solidly mounted cable (approx. 1.5 m). The cable length is
compensated. Other cable lengths (max. 5 m) and protection tubes
are available on enquiry.
Type AF:
Model for wall mounting, for example, as external probe. In this type,
themeasuringprobeishorizontallyanged(atthefrontside)tothe
evaluation electronics. The protection tube length is around 35 mm.
Order
Temperature probe with transducer Order No.
Typ INT - 0 ...10V TF-GLT-10V-INT-T1
Typ INT - 4 ... 20mA TF-GLT-20MA-INT-T1
Typ EXT - 0 ... 10V TF-GLT-10V-EXT-T1
Typ EXT - 4 ... 20mA TF-GLT-20MA-EXT-T1
Typ AF - 0 ... 10V TF-GLT-10V-AF-T1
Typ AF - 4 ... 20mA TF-GLT-20MA-AF-T1
Guarantee
On our high quality measuring probes, you get a guarantee of 24
months.Mechanically damaged sensors or tampering into electronics
makes the sensors devoid of guarantee claims. Calibration services
are not covered in the guarantee.
Temperature probe with transducer
Series TF-GLT
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon [phone] | Fax [phone] | [e-mail] | bb-sensors.com
3 / 4