User manual

OPERATING INSTRUCTION
Technical changes reserved
0141 0315-199 09/2014
Humidity reference cells
for adjustment of humidity sensors
Congratulations on the purchase of this high quality product! The quality of our products is constantly monitored within the framework of our
Quality Management systems as per ISO 9001 standards. Nevertheless, if still there are any reasons for complaint, we are ready to rectify
the shortcomings free of charge within the warranty period of 24 months, if it is evident that the defect is due to some mistake on our part.
Prerequisite for the fullment of warranty service is that the details of defect should be informed to us immediately and within the stipulated
warranty period.
Natural damages due to unintended use or due to non-compliance of operating instructions, is excluded from this warranty coverage. Moreo
-
ver, defective sensors and sensing units and also calibration service are not covered in the warranty.
In addition, the warranty also turns invalid if the reference cells are opened. The serial number on the product should not be changed, dama
-
ged or removed.
Apart from the warranty service, if any essential repairs are required to be carried out, the service is free. However, further services and also
postage and packing expenses are chargeable.
Compensation demands on the basis of claim for liability or damages during the warranty period are excluded if not in general legally covered.
During the tenure of warranty period, we are very much at your disposal with our service support. For any malfunctioning, you can simply
send back the product to us with a short description of problems observed. Please don’t forget to mention your telephone number to enable
us to contact for any possible queries.
We shall inform you about the likely amount of repair charges before taking up the repair activity. The cost estimate is provided free. The
postage and packing charges for return are to be added over and above the repair costs.
In our calibration laboratory, we can also calibrate your measurement and test equipment of other manufacturers with repeatability of
National standards. Please send your enquiries to our attention. We are pleased to prepare an offer for you without any order commitment!
Service adress:
B+B Thermo-Technik GmbH
Heinrich-Hertz-Str. 4
78166 Donaueschingen
Germany
Telephone [phone]
Fax [phone]
[e-mail]
www.bb-sensors.com
8. Warranty
8.1 Repair and Calibration service
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon [phone] | Fax [phone] | [e-mail] | bb-sensors.com
9 / 10