Datasheet

DATA SHEET
Technical changes reserved
0141 0316-145 07/2014
PIR motion alarm module
DescriptionDescription
Technical Data
Operating temperature -20...+60 °C
Operation humidity 0...90% RH (bedewing not admissible)
Switch point light intensity approx. 100...2000 Lux
Follow-up time 10...200 sec.
Frequency bandwidth 0,2...10 Hz
Angle of aperture PIR-AISC-FRES: horizontally ± 50°
vertical ± 30°
PIR-ASIC: horizontally ± 45°
Operating distance
PIR-ASIC-FRES: approx. 4...10 m adjustable
PIR-ASIC: approc. 2...8 m adjustable
Output Isolated free relay contact
40 V/ 3 A DC
Power supply 11...15 V DC
Current draw quiescent 6 mA
operating 21 mA
Dimensions (W x H x D) PIR-ASIC-FRES: 26 x 78 x 32 mm
Mounting hole Ø 24 mm
PIR-ASIC: 26 x 78 x 38 mm
Article no.
PIR motion alarm module
with fresnell-lense
PIR-ASIC-FRES
PIR motion alarm module
with mirror-optic
PIR-ASIC
PIR motion alarm module
with fresnell-lense
PIR-ASIC-FRES
PIR motion alarm mo-
dule with mirror- optic
PIR-ASIC
Features:
• Motion alarm module with ASIC
• Two versions available
• Adjustable, delayed triggerable timer
• Day/Night operation through light sensor
• Digital evaluation lter
• Adjustable sensitivity
• Test mode & continuous circuit
• Interference proof circuit design
• High power relay output
Applications:
• Automatic lighting control
• 12 V operation, automotive systems
• Solar lights, LED-outdoor lighting
• Fans for bathrooms and sanitary rooms
• Alarm and safety systems
• Presence alarm units, building instrumentation
• OEM applications
Description:
The motion alarm unit module is suitable for a large number of applica-
tions, in which movement or presence is to be registered and based
on this, a switching process is to be initiated. The sensor reacts to
the heat radiation from moving bodies. The module has a timer and a
high power relay output and hence it is ideally suitable, for example,
for automatic triggering of lights. Because of the digital evaluation
lters integrated in the ASIC, the module is also suitable for applica-
tion in alarming systems, where a high level of actuating reliability is
essential.
The operating voltage of 12V is internally stabilised, therefore the
module is also suitable for battery driven applications like cars or vans,
and also for battery- or solar powered lights.
The sensitivity, time delay and light dependent switching point can
be adjusted over wide ranges through 3 potentiometers. Hence, the
module can be well adapted as per the desired application.
In the ASIC, there are also further special functions like test mode for
ease of adjustment and continuous mode with long time delay which
can be switched on with an external button. The RESET circuit starts
the light during specied switching on phase, until the sensor system
becomes operational.
The electronics module without housing is meant for mounting into
customised devices.
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon [phone] | Fax [phone] | [e-mail] | bb-sensors.com
1 / 4