User manual

OPERATION MANUAL
Technical changes reserved
0141 0316-224 02.12.2014
Humidity-Temperature probe with
standard Signal FF-GLT-Series
Temperature measuring part
Type Desceiption
TE0 Without additional temperature measurement
TE1 With second measuring amplier for temperature
measurement, also conversion to 0 ... 10 V
or 4 ... 20 mA standard signal.
TEPT Temperature measurement with passive Pt1000
measuring resistance, potential free at terminals of
the connector.
Ordering numbers
Humidity-Temperature probe Ordering No.
Type INT - 0 ...10V FF-GLT-10V-INT-TE0
FF-GLT-10V-INT-TE1
FF-GLT-10V-INT-TEPT
4 ... 20mA FF-GLT-20MA-INT-TE0
FF-GLT-20MA-INT-TE1
FF-GLT-20MA-INT-TEPT
Type EXT - 0 ...10V FF-GLT-10V-EXT-TE0
FF-GLT-10V-EXT-TE1
FF-GLT-10V-EXT-TEPT
4 ... 20mA FF-GLT-20MA-EXT-TE0
FF-GLT-20MA-EXT-TE1
FF-GLT-20MA-EXT-TEPT
Type AF - 0 ...10V FF-GLT-10V-AF-TE0
FF-GLT-10V-AF-TE1
FF-GLT-10V-AF-TEPT
4 ... 20mA FF-GLT-20MA-AF-TE0
FF-GLT-20MA-AF-TE1
FF-GLT-20MA-AF-TEPT
Accessoires
Reference cells, Set 33 % und 75 % REFZ-M20-SET1
Optionen
Length of probe tube
Length of measuring probe cable (only - EXT)
Output scaling of temperature and humidity
Guarantee
On our high quality measuring probes, you get a guarantee of 24
months. Mechanically damaged sensors or tampering into electronics
makes the sensors devoid of guarantee claims. Calibration services
are not covered in the guarantee.
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon [phone] | Fax [phone] | [e-mail] | bb-sensors.com
7 / 7