Manual

1-8
Industrial Operator Panels
Features
WOP-2057V
Specifications
General
 Certifications CE / FCC / BSMI / UL / CCC
 Dimensions (WxHxD) 187 x 145.7 x 45 mm (7.36" x 5.73" x 1.77")
 Cut-out Dimensions 174.5 x 132.5 mm (6.87" x 5.21")
 Front Panel Thickness 6mm
 Operating System HMI RTOS, PM Designer 2.0
 Power Supply Voltage 24V
DC
±10%
 Power Consumption 15W
 Enclosure Housing Plastic
 Mounting Panel
 Weight (Net) 0.65 kg (1.42 lbs)
System Hardware
 CPU RISC 32bits, 70MHz
 Battery Backup Memory 128KB
 Flash Memory 4MB
 Power-On LED Yes
 Communication LED COM1 and COM2
 Front USB Access No
Communication Interface
 COM1 RS-232/422/485 (DB9 Female)
 COM2 RS-232/422/485 (DB9 Male & 5-Pin Connector)
 COM3 None
 Ethernet (RJ45) 10/100-BaseT (for N1AE model)
 I/Os USB Client No
USB Host No
Micro-SD Slot No
LCD Display and Touchscreen
 Display Type QVGA TFT LCD
 Display Size 5.7"
 Max. Resolution 320 x 240
 Max. Colors 265 colors
 Luminance (cd/m
2
) 400
 Viewing Angle (H/V°) 100/95
 Backlight Life LED, 20,000 hrs
 Dimming Adjustable by touch panel
 Touchscreen 4 wire analog resistive
Environment
 Operating Temperature 0 ~ 50° C (32 ~ 122° F)
 Storage Temperature -20 ~ 60° C (-4 ~ 140° F)
 Humidity 10 ~ 95% RH @ 40° C, non-condensing
 Ingress Protection Front panel: NEMA4, IP65
 Vibration Protection Operating, radom vibration 1 Grms (5 ~ 500 Hz)
Ordering Information
 WOP-2057V-S1AE 5.7" QVGA, 4MB, RS-232/422/485
 WOP-2057V-N1AE 5.7" QVGA, 4MB, RS-232/422/485, Ethernet
 Various LCD sizes (3.5”, 5.7”, 7”, 8”, 10.4”, 12.1”)
 Supports ARM9-based CPUs with 70~200MHz and 4~16M flash memory size
 Supports RTC, battery backup RAM, and Ethernet-based operator panels
 Supports Runtime data downloads through Serial, Ethernet, USB
 Supports adjustable brightness controls via touch panel
 Reliable firmware for 24/7 operation
 Supports Windows XP/ Vista-based PM Designer 2.0 development tool
 Easy to switch one application to different LCD sizes in seconds
 Supports vertical and horizontal application screen rotation
 Supports over 250 PLC industrial communication protocols
 Communicates with up to four types of devices
 Panel mounting for machinery
5.7" QVGA Operator Panel with
PM Designer 2.0 Software
Introduction
To satisfy the stringent standards required in the automation market, especially packaging, label slitting, and motion-based robot dispensing, Advantech offers the WOP-2000 series
which are designed with ARM9-based RISC CPU with 70~200MHz and 4~16MB flash memory size for application software. The WOP-2000 series also support a variety of LCD size
from 3.5" to 12.1" for different applications involving the use of PLCs, motion/thermal controllers, inverters and sensors. PM Designer 2.0 is a software development kit which helps
create application solutions for labor-saving, improved efficiency of manufacturing and easy control of every machine in the factory. The WOP-2000 series is bundled with PM Designer
2.0 offering an outstanding price performance ratio for various markets such as conventional operator panels, HMI + Low mini SCADA systems, and HMI + communication gateways.