User manual

Section 4 - Configuring the Serial Server Vlinx VESR4x4 Serial Server
Page 33 of 70 Manual Documentation Number: VESR4x4-0712m
www.bb-elec.com/
www.bb-europe.com/
3. Click Save.
Setting up IP Addressing
On the Network Configuration page you can configure the serial server to use
dynamic (DHCP) or static IP addressing on the network.
Figure 28. Network Configuration Page
Setting up Dynamic IP Addressing
1. Select the I want to use DHCP to setup the network check box.
Setting up Static IP Addressing
1. Ensure the I want to use DHCP to setup the network box is un-checked.
Figure 29. IP Address Settings
2. Type the IP Address, Subnet Mask and Default Gateway addresses in the
appropriate boxes.