Service manual

Suggested Calibration Weights:

Calibration weight 1 Calibration Weight 2

CBK 3M 1 kg 2 kg

CBK 6M 2 kg 4 kg

CBK 15M 5 kg 10 kg

CBK 30M 10 kg 20 kg

8.2 F2 -RESOLUTION

NOTE: This value can not be changed for the CBK-M scales.

8.3 F3 – CAPACITY

To enter this parameter, press the [Tare] key when “F3 CAP” is shown.

The display will show the current capacity.

Press the [Func] key to scroll through the options.

Press [Tare] to accept the displayed value and return to the parameter or press the [Zero]

key to return to the parameter without changing the value.

Then press [Func] to advance to the next parameter.

NOTE: The scale must be originally built for the capacity selected. The 3 kg unit uses the

5 kg load cells, 6 kg unit uses 10 kg load cells, the 15 kg unit uses 20 kg load cells and the

30 kg unit uses 35 kg load cells.

8.4 F4 -INITIAL ZERO RANGE

To enter this parameter, press the [Tare] key when “F4 int” is shown.

The display will show the current initial zero range.

Press the [Func] key to scroll through the options.