User manual

B&B Electronics, Inc. SPECTRE User Manual
35
SPECTRE_User_Manual_2912m
www.bb-elec.com
www.bb-europe.com
0x100F
R/-
1. log – lower 16 bits of counter CNT2 value
0x1010
R/-
1. log – prompt frequency CNT2
0x1011
R/-
1. log – average frequency CNT2
0x1012
R/-
1. log – minimal frequency CNT2
0x1013
R/-
1. log – maximal frequency CNT2
0x1100
R/-
2. log
0x1200
R/-
3. log
...
R/-
...
0xEF00
R/-
224. log
0xF000
-/W
Samples stores period [min]
0xF001
-/W
Allowed:
bit 0 – active level on input BIN1
bit 1 – active level on input BIN2
bit 2 – active level on input BIN3
bit 3 – active level on input BIN4
bit 4 – analog input AN1 lower limit overrun
bit 5 – analog input AN1 upper limit overrun
bit 6 – analog input AN2 lower limit overrun
bit 7 – analog input AN2 upper limit overrun
bit 8 – limit frequency CNT1 overrun
bit 9 – limit frequency CNT2 overrun
0xF100
-/W
Binary inputs negative logical
bit 0 – input BIN1
bit 1 – input BIN2
bit 2 – input BIN3
bit 3 – input BIN4
0xF200
-/W
Binary outputs normal level
bit 0 – output OUT1
0xF201
-/W
Feeder – impulse number on input BIN1/CNT1
0xF202
-/W
Feeder – impulse length on output OUT1 [1/8 sec]
0xF300
-/W
AN1 – samples period [sec]
0xF301
-/W
AN1 – multiplicative constant (with sign)
0xF302
-/W
AN1 – additive constant (with sign)
0xF303
-/W
AN1 – hysteresis value (with sign)
0xF304
-/W
AN1 – lower limit (with sign)