System information

B&B Electronics, Inc. SPECTRE Configuration Manual
61
SPECTRE_Configuration_Manual_2912m
www.bb-elec.com
www.bb-europe.com
The format of the Router Power-On SMS message is as follows:
Router (Unit ID) has been powered up. GSM signal strength –xx dBm.
The format of the Router PPP connection SMS message is as follows:
Router (Unit ID) has established PPP connection. IP address xxx.xxx.xxx.xxx
After a PPP disconnect, the router will send an SMS message in the form:
Router (Unit ID) has lost PPP connection. IP address xxx.xxx.xxx.xxx
SMS Configuration Example:
Fig. 48: Example of SMS configuration 1