Specifications

Si3216
74 Rev. 1.0
Not Recommended
f
o
r N
e
w
D
e
si
g
n
s
Reset settings = 0000_0000
Register 32. Oscillator 1 Control
BitD7D6D5D4D3D2D1D0
Name
OSS1 REL OZ1 O1TAE O1TIE O1E O1SO[1:0]
Type R R/W R/W R/W R/W R/W R/W
Bit Name Function
7 OSS1 Oscillator 1 Signal Status.
0 = Output signal inactive.
1 = Output signal active.
6REL
Oscillator 1 Automatic Register Reload.
This bit should be set for FSK signaling.
0 = Oscillator 1 will stop signaling after inactive timer expires.
1 = Oscillator 1 will continue to read register parameters and output signals.
5OZ1
Oscillator 1 Zero Cross Enable.
0 = Signal terminates after active timer expires.
1 = Signal terminates at zero crossing after active timer expires.
4O1TAE
Oscillator 1 Active Timer Enable.
0=Disable timer.
1 = Enable timer.
3O1TIE
Oscillator 1 Inactive Timer Enable.
0=Disable timer.
1 = Enable timer.
2O1E
Oscillator 1 Enable.
0 = Disable oscillator.
1 = Enable oscillator.
1:0 O1SO[1:0]
Oscillator 1 Signal Output Routing.
00 = Unassigned path (output not connected).
01 = Assign to transmit path.
10 = Assign to receive path.
11 = Assign to both paths.