System information

Using RealPort
36 Manual Documentation Number: PES1A/PESV1A-0712m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Adding a Virtual COM Port using RealPort
Windows 2000/XP/Vista:
1. Locate the RealPort driver software on the CD you received with
your PES1A/PESV1A.
2. Find the RealPort setup.exe file for your PC‟s operating system.
3. Start the setup.exe file. The RealPort Setup Wizard Welcome
dialog appears.
4. Select the Add a New Device, then click Next. The Select Device
dialog appears listing the IP Address, MAC Address and Model of
all devices on the network. To identify your PES1A/PESV1A
compare the MAC address listed with the MAC address on the label
on your PES1A/PESV1A.
5. Select the device to be configured as a virtual COM port and click
Next.
6. In the Select COM Port dialog that appears, select the COM port
number to be assigned to the PES1A/PESV1A. Click Next. A
progress screen will appear.
7. When the process is complete click Finish.
Windows 98, ME, NT 4.0:
1. Follow the readme.txt included with each O/S on the CD (no
setup.exe available).
Removing a Virtual COM Port using RealPort
Windows 2000/XP/Vista:
1. Locate the RealPort driver software on the CD you received with
your PES1A/PESV1A.
2. Find the RealPort setup.exe file for your operating system.
3. Start the setup.exe file. The RealPort Setup Wizard Welcome
dialog appears.