System information

Configuring the IP Address
14 Manual Documentation Number: PES1A/PESV1A-0712m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
If you need to change the IP address of the PES1A/PESV1A, you can
accomplish this using the discovery software, or you can open the Web
Configuration and Management Interface and do it there. (See Configuring
Network Settings later in the next chapter.)
1. To change the IP address of the PES1A/PESV1A from the
discovery software, click Configure IP Settings.
2. In the dialog that appears, select Manually configure network
settings.
3. Type the new IP Address, Subnet Mask, Default Gateway and
system password (initially dbps) in the appropriate boxes, then click
Apply.
4. Click Reboot Device. This may take a minute or more to complete.
5. Click Refresh List to confirm the new IP address has been
accepted.