System information

Hardware Overview
6 Manual Documentation Number: PES1A/PESV1A-0712m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Indicators, Switches and Connectors
Link Integrity LED (Yellow)
When the yellow LED located on the Ethernet jack is illuminated it indicates
that a connection (link integrity) has been established between the converter
and a node on the network.
Network Activity LED
When the green LED located on the Ethernet jack is flashing it indicates
data is being sent across the network.
Figure 4. LED Indicators on the PES1A
Reset Switch
The Reset switch is a recessed switch located on the RJ-45 end of the PES1A
and on the side of the PESV1A. The Reset switch provides two functions:
Press and release within 10 seconds
Resets the PES1A/PESV1A
Press and hold for more than 10 seconds
while powering up
Reloads factory default values
Voltage Output Selector Switch (PESV1A only)
A three-position slide switch located on the side of the PESV1A allows you
to select the voltage output (available on the two position terminal block).
The three voltages available are:
5 VDC
9 VDC
12 VDC