User`s manual

. LVDS1: 18bit LVDS interface from 945GSE chipset (2x15 pin 1.25mm wafer)

3-17 LVDS Interface Connector

PIN NO. Description PIN NO. Description

1 PWM dimming 2 +5V

3 +LCD (5V or 3.3V) 4 +LCD (5V or 3.3V)

5 NC 6 NC

7 NC 8 NC

9 Channel-0-DATA2+ 10 Channel-0-CLK+

11 Channel-0-DATA2- 12 Channel-0-CLK-

13 GND 14 GND

15 Channel-0-DATA1+ 16 Channel-0-DATA0+

17 Channel-0-DATA1- 18 Channel-0-DATA0-

GND

+LCD(5V or 3.3V)

GND

+LCD(5V or 3.3V)

pin1

LVDS1

Note: 1. JVL1: LVDS panel +5V/+3.3V Voltage select

2. LVDS1 PIN 1 for panel backlight active default Hi or Low by JSD1 jumper setting.

3. Pin 1 back light dimming control.

provided 200Hz / 275Hz / 380Hz / 20KHz /25KHz

and adjust PWM duty cycle by software program .

3-18 Panel Power Connector

. CPP1: Panel Inverter power (5pin 2.0mm wafer)

PIN NO. Description

1 +12V or +5V

2 GND

3 PWM dimming

4 ENBKL(3.3V)

5 ENBKL(5V)

CPP1

pin1

Note : 1. JVP1 Inverter Voltage select

2. CCP1 PIN 3 and LVDS1 PIN1 is same signal.

Default active setup by JSD1

3. Pin 3 back light dimming control .

provided 200Hz / 275Hz / 380Hz / 20KHz /25KHz

and adjust PWM duty cycle by software program .