User`s manual

34
3-10 LAN connector
The Fast Ethernet controller provides 32-bit performance, PCIe bus master capability,
and full compliance with IEEE 802.3 10/100/1000 Based-T specification.
For 10/100/1000 Base-T operation, please connect the network connection
by plugging one end of the cable into the RJ-45 jack of the CUL1/CUL2 Connector.
Besides 10/100/1000 Base-T, CI270CW can provide Intel Giga LAN solution through
CUL1/CUL2 once equipped with Intel 82574L chipset.
. CUL1 / CUL2 (Up side) :LAN Giga/100Mb Jack
PIN NO. Description PIN NO. Description
1 TD0-/TX+ 5 TD2-/NC
2 TD0+/TX- 6 TD2+/RX-
3 TD1-/RX+ 7 TD3-/NC
4 TD1+/NC 8 TD3+/NC
CUL2
CUL1
LAN LED
Speed
Indicate
10 Mbps 100 Mbps
1000 Mbps
Back Side
LAN light
Fornt Side
Link Led
Orange Orange Orange Orange Orange Orange OrangeRedGreen
ACT Led ACT Led ACT Led ACT Led ACT Led ACT LedLink Led Link Led
Back Side Fornt Side Back Side Fornt Side
Intel 82574L
LAN LED
Speed
Indicate
10 Mbps 100 Mbps
1000 Mbps
Back Side
LAN light
Fornt Side
Link Led
Orange Orange Orange OrangeRedGreen
ACT Led ACT Led ACT Led ACT Led ACT Led ACT LedLink Led Link Led
Back Side Fornt Side Back Side Fornt Side
Realtek RTL8111C
LAN LED