Operating instructions

106 FLOWSIC600 · Operating Instructions · 8010125 V 4.0 · © SICK AG
Troubleshooting
Subject to change without notice
6.2.4 Battery lifespan / capacity
Because the FLOWSIC600 has no regular maintenance cycle, a user warning will be
automatically generated if the remaining battery life is less than 15%. After 8.5 years, a
warning is generated which forces the operator to change the battery. The battery may only
be changed by trained staff. The procedure for changing the battery is described in the
Service Manual. For further information on warning settings see Technical Information.
Figure 41 Flashing message on the LCD display, prompts to change the battery
Figure 42 "Battery Lifespan" status bit in "Meter Status" window
INFORMATION 1030
LifeSpan Battery
"Battery
Lifespan" status
bit