Product data

38
MSView
pointstoale,readsetpointsfromtheSSD,programtotheSSD,editdisplayedsetpoints,or
createanewsetpointprole.Thenextscreenpromptstheuserfortwosetsofcustomsetpoints
forBattery1.DIPswitch1willselectbetweenthesetwosets.ClickNextwhennishedtocus-
tomizesettingsforBattery2.DIPswitch2willselectbetweenBattery2’ssetpointproles.
Common setpoints are shared between all sets of custom setpoints and will specify charging
priority, temperature compensation, and MeterBus
TM
/MODBUS
TM
addresses. DIP switch 3 toggles
between sets of charging priority setpoints.
Formoreinformationonspeciccustomsetpointsandtheireffects,pleaserefertotheHelp Top-
ics in MSView
TM
.
5.5.3 SunSaverMPPT Setup Wizard
Custom settings can be programmed to the SunSaverMPPT via MSView
TM
. This wizard allows
forstepbystepspecicationofthesesettings.AfterselectingtheSSMPPTSetupWizard,please
read the warning and select OK if you accept the terms.
NOTE: DIP switch 1 must be ON to use custom charge
settings. Disconnect power from the controller before
changing any DIP switches; failure to do so will cause a
fault.
NOTE: DIP switch 4 must be ON to for MSView to
communicate successfully using MODBUS.
As you progress through the wizard, you will be able to specify two sets of charge settings: Set-
ting 1 active when the Battery Select Jumper is Inserted and Setting 2 active when it is removed.
Sharedchargesettingsarealsodened,alongwithLoadsettings.Finally,MeterBus
TM
/MOD-
BUS
TM
addresses and LED transition threshold voltages can be set.
For an in-depth description of charge settings, load settings, and transition voltages, please refer
to the Help Topics in MSView
TM
.
5.5.4 TriStar DIP Switch Wizard
TheTriStarhaseightDIPswitchsettingswhichneedtobeproperlyconguredforcorrectop-
eration of the controller. The TriStar DIP Switch Wizard provides step by step instructions for
determining appropriate DIP switch positions. The wizard will prompt the user for the desired
operational parameters and provide a graphical representation of the appropriate DIP switch
conguration.Thewizardcannotchangetheswitchsettingsfortheuser;theusermustphysically
position the switches according to the wizard’s recommendations.