Product specifications

Visit www.imcnetworks.com or www.mediaconverter.com
Call 1-800-624-1070 for more information.
Ordering Information
33
Fast Delivery... Unmatched Technical Support
Managed Auto Cross
Auto
Negotiation
Fiber Alert
FIBER
LOS
X
X
LINK
LINK
Link Loss
X
X
LOS
iMcV-E1-Mux/4+Ethernet (Enhanced)
The IE-iMcV-E1-Mux/4 Transports Four E1
Extensions and One RS-232 Serial Link Over a
Fiber Optic Line With Optional 1+1 Protection
and Full-Bandwidth 10/100 Ethernet Support.
Product Overview
The IE-iMcV-E1-Mux/4 is a managed modular media converter,
installed as a Host/Remote pair, that transports four independent E1
lines over a single or dual fiber optic line. The module is ideal for
applications requiring TDM extension, such as remote office PABX
connectivity, with support for a full bandwidth 10/100BaseT Ethernet
connection over the same optical link.
The IE-iMcV-E1-Mux/4 allows for Bandwidth Limiting control in 32
Kbps increments up to 100 Mbps. It also detects Ethernet, AIS,
E1 and fiber LOS events as well as degraded lines with full LED
indications including a Remote Alarm Indicator (RAI) over the fiber
link. E1 ports can also be enabled or disabled via the CLI, Telnet
or SNMP management software, allowing the user to perform
maintenance on a particular line without affecting others.
Fiber redundancy (1+1) on removable SFP modules offers the
enhanced reliability of a protected fiber link while supporting the
complete range of optical types and distances. The 1+1 protection
system automatically switches to the best fiber line within 50
milliseconds, should one line become impaired or fail.
The module also features an independent serial link (RS-232) which
is carried over the same fiber link(s), and can be used for transporting
serial traffic from other equipment located at the remote point of
presence (POP) back to the central office. This unit also supports
an independent RS-232 console port for local monitoring and
configuration of the unit by technical support personnel.
Application Example
In a typical application, a Customer PABX is provided with up to
four E1 lines from the Public Switch Telephone Network (PSTN)
over a protected optical link. In addition, the customer location
can receive a full bandwidth, 100BaseT Ethernet connection to
the Internet from the local Internet Service Provider (ISP) over
the same, protected, optical link. Operation Administration and
Management (OAM) functions for the link are provided from the
Host location through either a “Console” RS-232 connection on
the Host unit or a SNMP connection through the management
interface at the Host chassis. In this example, the RS-232
“Console” port of the remote PABX is also carried back to the Host
location for remote management of the customer located PABX,
using the end-to-end serial RS-232 port on the iMcV-E1-Mux/4.
857-14400
iMcV-E1-Mux/4+Ethernet, SFP (requires one or two
SFP/155 Modules), Various
* ** iMcV-E1-Mux/4+Ethernet
Module (doublewide)
Features
• Four independent E1 ports on RJ-48 connectors
with surge protection
• AIS generation on signal loss on all E1 and fiber
interfaces
• AIS Detection
• Supports local and remote loopback functions
• Dual SFP fiber ports with 1+1 protection switching
• One optional full bandwidth, Ethernet
10/100BaseT port
• User defined bandwidth limiting on
Ethernet port
• Auto Negotiation or forced modes on the Ethernet
port
• E1 ports can be remotely disabled by user
• Supports Jumbo Ethernet frames to 1916
• Supports “Pause” Frames
• AutoCross MDI/MDI-X on Ethernet port
• Supports the Link Fault Pass-Through Function
(LFPT)
• DDMI register retrieval supported on
SFP port
• One end-to-end serial RS-232 port to 120 Kbps on
an RJ-45 connector
• Both Host/Remote are managed from the Host
unit
• Command Line Interface (CLI) management
provided via one MiniJack RS-232 console port
• Remote Graphical User Interface (GUI)
management through a managed iMediaChassis
• SNMP Alarm TRAP reporting in managed chassis,
including Last Gasp
• Full LED diagnostics on front panel
• IE model supports extended temperature
Ordering Information
Physical Specifications
Fiber Types Supported
• SFP
Connectors:
Four E1 (RJ-48) copper ports
Two SFP slots
One RS-232 on MiniJack
One 10/100BaseT on RJ-45
One RS-232 on RJ-45
Regulatory Approvals:
IEEE-802.3u, ITU G.775 (AIS, LOS), GR-820-CORE
Operating Temperature:
-40°F to 158°F (-40°C to +70°C)
Storage Temperature:
-40°F to +160°F (-40° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
Double-wide chassis module
Power Consumption (Typical):
0.96A @ +5 VDC
Shipping Weight:
1.1 lbs (0.50 kg)
857-18400
IE-iMcV-E1-Mux/4+Ethernet, SFP (requires one or two
SFP/155 Modules), Various
* ** IE-iMcV-E1-Mux/4+Ethernet
Module (doublewide)
825-39951
Serial Cable MiniJack to DB9(Female)
Available Accessories
** For more information call B&B Electronics sales or
visit www.imcnetworks.com
857-18111
iMcV-E1-Mux/4+Ethernet, SFP (requires one or two
SFP/155 Modules), Various
* iMcV-E1-Mux/4+Ethernet
(Enhanced) Module (doublewide)
t
t
t
t
t
t
NEW!
NEW!
Use with Chassis Platform
iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
* SFPs Sold Separately