Product specifications

Visit www.imcnetworks.com or www.mediaconverter.com
Call 1-800-624-1070 for more information.
Ordering Information
30
888.948.2248 | www.bb-elec.com / www.imcnetworks.com
iMcV-MediaLinX, iMcV-Giga-MediaLinX Modules
Product Overview
Satisfying today’s networking needs while preparing for tomorrow’s
cabling requirements can make designing and installing the physical
layer of networks a daunting task. The decreasing cost of fiber optic
cabling and switching equipment makes all-optical LANs the obvious
choice when future-proofing network equipment. Replacing legacy
equipment and wiring infrastructure is a costly choice. Managed media
conversion allows implementation of new technologies on existing
networks, while monitoring all connections, to keep networks running
and up-to-date.
B&B Electronics offers a wide range of SNMP-managed Ethernet
copper to fiber media converters, with a choice of fixed rate or
rate conversion capabilities. The “iMcV-“ modules also include
troubleshooting features and LEDs to assist in network diagnostics
as well as make isolating cable breaks easier. The iMcV-MediaLinX
and iMcV-Giga-MediaLinX also features Link Fault Pass-Through. In
addition, replacing the hot-swappable modules won’t disable other
modules services running within the same chassis, during product
upgrades or maintenance and troubleshooting.
All converters feature an RJ-45 copper port and a fiber port, with a
choice of SC or ST (non-Gigabit only) connectors.
“iMcV-“ media and rate converters include:
• iMcV-MediaLinX – convert 10 Mbps or 100 Mbps copper to 100
Mbps fiber
• iMcV-Giga-MediaLinX – convert 10 Mbps, 100 Mbps or 1000
Mbps copper to 1000 Mbps fiber
Rate converters employ Auto Negotiation functionality on the twisted
pair port for plug-and-play operation, or they can be manually
configured for the desired speed and duplex mode.
Managed Auto Cross
Auto
Negotiation
Fiber Alert
FIBER
LOS
X
X
LINK
LINK
Link Loss
X
X
LOS
Monitor and control all connections from a
central site with SNMP-manageable “iMcV-“
media conversion modules.
Features
Meets a variety of installation requirements
• Choose from a range of speeds up to Gigabit
Ethernet
• Available for multi-mode or single-mode fiber
• Double fiber capacity with single-strand fiber
versions
• Supports very long fiber distances
Easy to configure and manage with GUI-based
iView²
• Up and running in less than five minutes
• Monitor links and receive vital traffic and health
information and notification should problems
occur
Maximizes network uptime
• Modular, hot-swappable architecture reduces
operational costs associated with product
installation, upgrades and maintenance
Configuration Control
• Retains the latest configuration
856-15711
iMcV-MediaLinX, TX/FX-MM850-ST, 2 km
856-15712
iMcV-MediaLinX, TX/FX-MM850-SC, 2 km
856-15713
iMcV-MediaLinX, TX/FX-MM1300-ST, 5 km
856-15714
iMcV-MediaLinX, TX/FX-MM1300-SC, 5 km
856-15717
iMcV-MediaLinX, TX/FX-SM1310/PLUS-ST, 40 km
856-15718
iMcV-MediaLinX, TX/FX-SM1310/PLUS-SC, 40 km
856-15719
iMcV-MediaLinX, TX/FX-SM1310/LONG-ST, 80 km
856-15720
iMcV-MediaLinX, TX/FX-SM1310/LONG-SC, 80 km
856-15723
iMcV-MediaLinX, TX/FX-SM1550/LONG-SC, 80 km
Single-Strand Fiber
856-15731
iMcV-MediaLinX, TX/SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km
856-15732
iMcV-MediaLinX, TX/SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km
856-15733
iMcV-MediaLinX, TX/SSFX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
856-15734
iMcV-MediaLinX, TX/SSFX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
856-15735
iMcV-MediaLinX, TX/SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km
856-15736
iMcV-MediaLinX, TX/SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km
iMcV-MediaLinX TX/FX
10/100 Mbps with Link Fault
Pass-Through (LFPT) and Config
Control **
856-11959
iMcV-Giga-MediaLinX, TX/SX-MM850-ST, 220/550 m
856-11950
iMcV-Giga-MediaLinX, TX/SX-MM850-SC, 220/550 m
856-11951
iMcV-Giga-MediaLinX, TX/LX-SM1310-SC, 15 km
856-11952
iMcV-Giga-MediaLinX, TX/LX-SM1310/PLUS-SC, 40 km
856-11953
iMcV-Giga-MediaLinX, TX/LX-SM1550/LONG-SC, 80 km
856-11958
iMcV-Giga-MediaLinX, TX/LX-SM1550/XLONG-SC, 100 km
Single-Strand Fiber
856-11940
iMcV-Giga-MediaLinX, TX/SSLX-SM1310-SC
(1310xmt/1550rcv), 10 km
856-11941
iMcV-Giga-MediaLinX, TX/SSLX-SM1550-SC
(1550xmt/1310rcv), 10 km
856-11933
iMcV-Giga-MediaLinX, TX/SSBX-SM1310-SC
(1310xmt/1490rcv), 10 km
856-11935
iMcV-Giga-MediaLinX, TX/SSBX-SM1490-SC
(1490xmt/1310rcv), 10 km
856-11942
iMcV-Giga-MediaLinX, TX/SSLX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
856-11943
iMcV-Giga-MediaLinX, TX/SSLX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
856-11937
iMcV-Giga-MediaLinX, TX/SSBX-SM1310/PLUS-SC
(1310xmt/1490rcv), 30 km
856-11939
iMcV-Giga-MediaLinX, TX/SSBX-SM1490/PLUS-SC
(1490xmt/1310rcv), 30 km
856-11954
iMcV-Giga-MediaLinX, TX/SSLX-SM1490/LONG-SC
(1490xmt/1550rcv), 70 km
856-11955
iMcV-Giga-MediaLinX, TX/SSLX-SM1550/LONG-SC
(1550xmt/1490rcv), 70 km
iMcV-Giga-MediaLinX TX/LX
10/100/1000 Mbps with Link Fault
Pass-Through (LFPT)
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
RJ-45, ST and SC
Regulatory Approvals:
FCC Class B, CE
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-13° to +158°F (-25° to +70°C)
IE Operating Temperature:
-40° to + 185°F(-40° to +85°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
4.19”H x 0.78”W x 2.75”D (10.74 x 2 x 7.05 cm)
Shipping Weight:
0.30 lbs (0.11 kg)
LFPT
X
X
X
* **IE-iMcV-MediaLinX TX/SFP
10/100 Mbps with Link Fault
Pass-Through (LFPT) and Config
Control
856-18700
IE-iMcV-MediaLinX, TX/SFP (requires one SFP/155-ED
Module required)
Config
Control
Configuration Control
Is available on select models of the iMcV-MediaLinx and
IE-iMcV-MediaLinX TX/SFP. Its main function is to assist the
end-user by retaining the latest configuration regardless of how
the initial configuration was setup, whether through DIP Switch
settings or the SNMP Management Module’s configuration.
Config
Control
** Notes: Modules with the Config Control Feature
• iView
2
v.1.8.9 and SNMP Firmware v.C4 must be installed to use IMC’s
Configuration Control Feature
• iMcV-Modules that offer Configuration Control are identified by the label on
the front faceplate and reference a different part number.
• New replacement products are NOT backwards compatible with the
iMediaChassis/18
CWDM versions available,
See website for details
Use with Chassis Platform
iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
* SFPs Sold Separately