Product specifications

Visit www.imcnetworks.com or www.mediaconverter.com
Call 1-800-624-1070 for more information.
Ordering Information
29
Fast Delivery... Unmatched Technical Support
iMcV-Gigabit Modules
Product Overview
Satisfying today’s networking needs while preparing for tomorrow’s
cabling requirements can make designing and installing the physical
layer of networks a daunting task. The decreasing cost of fiber optic
cabling and switching equipment makes all-optical LANs the obvious
choice when future-proofing network equipment. Replacing legacy
equipment and wiring infrastructure is a costly choice. Managed media
conversion allows implementation of new technologies on existing
networks, while monitoring all connections, to keep networks running
and up-to-date.
B&B Electronics offers a range of SNMP-managed Ethernet copper to
fiber media converters, with a choice of fixed rate or rate conversion
capabilities. The “iMcV-“ modules also include troubleshooting
features and LEDs to assist in network diagnostics as well as make
isolating cable breaks easier. In addition, replacing the hot-swappable
modules won’t disable other modules services running within the same
chassis, during product upgrades or maintenance and troubleshooting.
All converters feature an RJ-45 copper port and a fiber port with SC
connectors.
“iMcV-“ media converters include:
• iMcV-Gigabit - convert copper to fiber at a data rate of up to
1.25 Gbps
Managed Auto Cross
Auto
Negotiation
Fiber Alert
FIBER
LOS
X
X
LINK
LINK
Link Loss
X
X
LOS
Monitor and control all connections from a
central site with SNMP-manageable “iMcV-“
media conversion modules.
Features
Meets a variety of installation requirements
• Available for multi-mode or single-mode fiber
• Double fiber capacity with single-strand fiber
versions
• Supports very long fiber distances
Easy to configure and manage with GUI-based
iView²
• Up and running in less than five minutes
• Monitor links and receive vital traffic and health
information and notification should problems
occur
Maximizes network uptime
• Modular, hot-swappable architecture reduces
operational costs associated with product
installation, upgrades and maintenance
Configuration Control
• Retains the latest configuration
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
RJ-45, ST and SC
Regulatory Approvals:
FCC Class A, CE
Operating Temperature:
+32° to +122°F (0° to +50°C)
IE Operating Temperature:
-40° to + 185°F(-40° to +85°C)
Storage Temperature:
-13° to +158°F (-25° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
4.19”H x 0.78”W x 2.75”D (10.74 x 2 x 7.05 cm)
Shipping Weight:
0.30 lbs (0.11 kg)
LFPT
X
X
X
Config
Control
850-15511
iMcV-Gigabit, TX/SX-MM850-SC, 220/550 m
850-15512
iMcV-Gigabit, TX/LX-SM1310-SC, 10 km
850-15513
iMcV-Gigabit, TX/LX-SM1310/PLUS-SC, 40 km
850-15514
iMcV-Gigabit, TX/LX-SM1550/LONG-SC, 80 km
850-15515
iMcV-Gigabit, TX/LX-SM1550/XLONG-SC, 100 km
Single-Strand Fiber
850-15521
iMcV-Gigabit, TX/SSLX-SM1310-SC
(1310xmt/1550rcv), 10 km
850-15522
iMcV-Gigabit, TX/SSLX-SM1550-SC
(1550xmt/1310rcv), 10 km
850-15523
iMcV-Gigabit, TX/SSBX-SM1310-SC
(1310xmt/1490rcv), 10 km
850-15524
iMcV-Gigabit, TX/SSBX-SM1490-SC
(1490xmt/1310rcv), 10 km
850-15525
iMcV-Gigabit, TX/SSLX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
850-15526
iMcV-Gigabit, TX/SSLX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
850-15527
iMcV-Gigabit, TX/SSBX-SM1310/PLUS-SC
(1310xmt/1490rcv), 30 km
850-15528
iMcV-Gigabit, TX/SSBX-SM1490/PLUS-SC
(1490xmt/1310rcv), 30 km
850-15529
iMcV-Gigabit, TX/SSLX-SM1490/LONG-SC
(1490xmt/1550rcv), 70 km
850-15530
iMcV-Gigabit, TX/SSLX-SM1550/LONG-SC
(1550xmt/1490rcv), 70 km
** iMcV-Gigabit TX/FX 1000 Mbps
with Link Fault Pass-Through
(LFPT) and Config Control
* **IE-iMcV-Gigabit TX/SFP 1000
Mbps with Link Fault Pass-
Through (LFPT) and Config
Control
850-18510
IE-iMcV-Gigabit, TX/SFP (requires one IE-SFP/1250
module)
Configuration Control
Is available on select models of the iMcV-Gigabit and
IE-iMcV-Gigabit SFP with LFPT. Its main function is to assist
the end-user by retaining the latest configuration regardless
of how the initial configuration was setup, whether through
DIP Switch settings or the SNMP Management Module’s
configuration.
Config
Control
** Notes: Modules with the Config Control Feature
• iView
2
v.1.8.9 and SNMP Firmware v.C4 must be installed to use IMC’s
Configuration Control Feature
• iMcV-Modules that offer Configuration Control are identified by the label on
the front faceplate and reference a different part number.
• New replacement products are NOT backwards compatible with the
iMediaChassis/18
CWDM versions available,
See website for details
Use with Chassis Platform
iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
* SFPs Sold Separately