Product specifications

Visit www.imcnetworks.com or www.mediaconverter.com
Call 1-800-624-1070 for more information.
Ordering Information
27
Fast Delivery... Unmatched Technical Support
IE-iMcV-2xLIM
Product Overview
The IE-iMcV-2xLIM, TX/SFP is a Fast Ethernet module which provides
two conversions of 100Base-TX twisted pair to 100Base-FX/SX single-
mode or multi-mode fiber. There are two sets of ports, RJ-45 (copper)
and SFP (fiber). The SFP port supports all MSA and Cisco compliant,
SC, LC and single-fiber 155 Mbps SFPs. Designed as a Layer 1
device, the IE-iMcV-2xLIM is entirely transparent to both Layer 2 and
Layer 3 protocols. The IE-iMcV-2xLIM is SNMP-manageable and can
be installed into the modular, SNMP-manageable iMediaChassis or the
MediaChassis series.
Easily configure and manage converters with the GUI-based iView².
As an SNMP management application, iView² gives network managers
the ability to monitor and control B&B Electronics’ products. iView²
runs standalone on Windows NT/XP/2000 or as a Web Server running
under IIS. For assistance in selecting the right version of iView² for your
operating system, visit our web site at: http://www.imcnetworks.com/
Products/iView2.cfm
Managed Auto Cross
Auto
Negotiation
Fiber Alert
FIBER
LOS
X
X
LINK
LINK
Link Loss
X
X
LOS
Double your media conversion capacity with
the IE-iMcV-2xLIM SNMP-manageable media
converter modules.
Features
Cost-effective and flexible
• Functions as two independent copper to fiber
media converters, thus doubling port density in
the iMediaChassis and MediaChassis product
lines
Maximizes network uptime
• 100 Mbps SFPs and 2xLIM modules are hot-
swappable; no need to power-down chassis
when upgrading or troubleshooting a single
module
Eases Troubleshooting
• Far End Fault provides notification of Far
End Link Loss on the fiber port.
• Link Fault Pass-Through (LFPT) is a
troubleshooting feature that monitors
the copper (TXLL) and fiber (FXLL) ports of the
unit; if a port loses LINK, the unit disables
the transmitting signal on the other port
and notifies the user via LED
• Config Control retains the latest module
configuration if it’s replaced, regardless of how
the initial configuration was setup; whether by
DIP Switch or SNMP Management Module
850-18610
IE-iMcV-2xLIM, TX/SFP (requires IE-SFP/155
module(s)), Various
* ** IE-iMcV-2xLIM, TX/SFP
LFPT
X
X
X
Config
Control
Configuration Control
Its main function is to assist the end-user by
retaining the latest configuration regardless
of how the initial configuration was setup,
whether through DIP Switch settings or the
SNMP Management Module’s configuration.
Config
Control
** Notes: Modules with the Config Control Feature
• iView
2
v.1.8.9 and SNMP Firmware v.C4 must be installed to
use IMC’s Configuration Control Feature
• iMcV-Modules that offer Configuration Control are identified
by the label on the front faceplate and reference a different
part number.
• New replacement products are NOT backwards compatible
with the iMediaChassis/18
Application Example
Populating a iMediaChassis/20 with 20 IE-iMcV-2xLIM modules
doubles the number of lines that can be served in an ISP network
environment at a lower cost. Additionally, it improves remote
management through the use of the FEF and LFPT functions and
through DDMI on select SFPs.
Physical Specifications
Connectors:
2 x RJ-45 and 2 x SFP ports (SFPs sold separately)
Regulatory Approvals:
FCC Class B
UL, CSA, CE
TUV
Operating Temperature:
-40° F to +176° F (-40° C to +80° C)
Storage Temperature:
-40° F to +176° F (-40° C to +80° C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
4.19”H x 0.78”W x 2.75”D (10.74 x 2 x 7.05 cm)
Shipping Weight:
0.30 lbs (0.11 kg)
Ordering Information
Use with Chassis Platform
iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
* SFPs Sold Separately